Cat 6e Cable Distance Limit

Therefore, an hdmi to displayport cable will be stuck at 15’ for its maximum length.

Cat 6e cable distance limit. Cat 6 is pricier and faster than cat 5e, but also limited by distance. These share many of the same physical characteristics including distance limitations, but cat5e is designed for faster networking speeds and reduced crosstalk interference. For example, a standalone hdmi cable can go up to 65’ while a standard displayport cable can go up to 15’.

This ranges from cat5e all the way to cat6a cables. A further difference within the ethernet cables whether cat 5, cat 5e, cat 6, cat 6e, or cat 7 can be whether solid or stranded wires are used within the cable. Cat 6a and cat 7 come shielded to improve connection quality and eliminate noise;

The category 6 augmented cable standard, or cat 6a, was created to further improve the performance of cat 6 ethernet cables. On the other hand, cat5e comes in shielded varieties, performing better in reducing noise. Then have another switch where the cable enters the other building (switch #3).

There are two main differences between the cat5 and cat5e network cables. So this means that cat6 cable will have a maximum channel length of 100 meters. Cat 6 and cat6a distance.

100 meters (90 in the wall, solid conductor, + up to 5 meters of jumper cordage ,stranded conductor at each end, is the spec for tia/eia 568 structured cabling (and hence, poe). Category 6a is not limited to 37m for 10g. Cat 6 supports 10 gigabit ethernet only up to 164 feet of cable length.

It has been replaced by cat5e, which is an enhanced version of cat5. However, these cables can be tested using higher frequencies and that is why you see cat5e cables labels for 350mhz and cat6 cables labeled for 550 or 600mhz. Cat5e cable has a rating of up to 100 mhz and cat6 cable can do up to 250 mhz.